• D.No: 2-2-2/E4, 3rd Floor,Kotagiri City Center,Bhanugudi Junction.

ENGINE STORES

FO & LO Filters

FO and LO are abbreviations commonly used in the context of filters, especially in electronics and signal processing. They stand for:

1.FO Filter:
FO stands for “Frequency Output” filter. This is not a widely recognized abbreviation in the field of filters, but it could refer to a filter designed to pass or attenuate specific frequency components in a signal. Depending on the application, FO filters could be low-pass filters, high-pass filters, band-pass filters, or band-stop filters.
2.LO Filter: LO stands for “Low-Order” filter. In this context, “order” refers to the complexity of the filter design, specifically the number of reactive components (like capacitors and inductors) used in the filter. A low-order filter would typically have fewer reactive components and a simpler design, while a high-order filter would have more complex circuitry. Low-order filters are often used when the filtering requirements are not very stringent, or when simplicity and cost-effectiveness are important.

Bearings

Bearings are mechanical components used to reduce friction and support the motion of rotating or linearly moving parts within a machine or system. They play a crucial role in various applications, from simple machinery like bicycles to complex industrial machinery and vehicles. Bearings help in achieving smoother and more efficient movement by allowing parts to roll or slide against each other with minimal resistance. There are several types of bearings, each designed for specific applications.

Oil filters

Oil filters are essential components in internal combustion engines and hydraulic systems that help remove contaminants and impurities from the oil to keep the system running smoothly and extend the life of the engine or machinery. Their primary purpose is to filter out particles, debris, and contaminants from the oil, ensuring that only clean and properly lubricated oil circulates through the engine or hydraulic system.

Engine Spares

“Engine spares” typically refer to spare parts or components used for repairing or maintaining engines, particularly internal combustion engines found in vehicles, machinery, generators, and other equipment. These spare parts are essential to keep engines operating efficiently and to address issues that may arise due to wear and tear, damage, or other factors. Engine spares can encompass a wide range of components and parts, depending on the type of engine and its application.

Valves % Pipe Fittings

alves and pipe fittings are essential components in plumbing, industrial processes, and fluid control systems. They serve different but complementary purposes in controlling the flow of liquids, gases, and other fluids through pipes and pipelines.

Valves:

Valves are devices designed to regulate, control, or stop the flow of fluid within a pipeline or system. They come in various types, each with specific functions and applications:

  1. Gate Valve: Gate valves are used to start or stop the flow of fluid. They are typically fully open or fully closed, with a gate-like disc that moves perpendicular to the flow.
  2. Ball Valve: Ball valves use a spherical disc to control the flow. When the handle is turned 90 degrees, the flow is either fully open or fully closed.
  3. Butterfly Valve: Butterfly valves use a disc that rotates within the pipe to control flow. They are often used for large-diameter pipes and in applications requiring quick operation.
  4. Check Valve: Check valves allow fluid to flow in one direction only, preventing backflow. They are commonly used to maintain flow in one direction in pipelines.
  5. Globe Valve: Globe valves control flow by raising or lowering a plug or disc within the valve body. They are used for fine control of fluid flow.
  6. Needle Valve: Needle valves have a slender, tapered needle-like stem that is used to precisely regulate flow rates. They are often used in applications where fine control is needed.
  7. Pressure Relief Valve: Pressure relief valves are designed to open at a predetermined pressure to protect equipment from overpressure. They are commonly used in safety applications.
  8. Control Valve: Control valves are used to modulate the flow rate or pressure of a fluid in response to a signal. They are commonly used in industrial automation and process control systems.

Hand tools & Wrenche

Hand tools and wrenches are essential items in any toolbox, whether for home maintenance, automotive repairs, construction, or various other tasks that require manual work. These tools help individuals perform tasks with precision, control, and efficiency.

Measuring Tools

Measuring tools are instruments used to quantify, assess, or determine the dimensions, quantities, or characteristics of objects, materials, or spaces. They are essential in a wide range of fields, including construction, engineering, manufacturing, and various DIY and hobbyist applications.

Generator Spares

Marking tapes, also known as floor marking tapes or safety tapes, are adhesive tapes designed for various applications in workplaces, warehouses, factories, and other settings. They are used to create visual cues, identify specific areas or hazards, and promote safety, organization, and efficiency.

Cotton Waste & Rag

Cotton waste and rags refer to materials made from discarded or leftover cotton textiles, such as clothing, bed linens, and towels, that are no longer suitable for their original intended use. These materials are typically recycled or repurposed for various applications.

Fasteners , Glues and Bonded items

Fasteners, glues, and bonded items are essential elements in construction, manufacturing, and various DIY (do-it-yourself) and industrial applications. They play a crucial role in joining materials together, creating strong connections, and ensuring the structural integrity of a wide range of products and structures.

‘ O ‘ Rings

‘O’ rings, also known as O-rings, are simple yet critical sealing devices used to prevent the leakage of fluids or gases between two mating parts. They are typically made of flexible and elastomeric materials, such as rubber (nitrile, silicone, EPDM, neoprene) or synthetic polymers (fluoroelastomers like Viton). These rings are commonly used in various industries and applications due to their versatility and effectiveness in creating reliable seals.

Air Condition Spares

Safety showers, also known as emergency showers or eyewash stations, are essential safety equipment used in workplaces where employees may be exposed to hazardous chemicals, substances, or materials that can cause injury to the skin or eyes. These showers are designed to provide immediate decontamination and first aid in the event of chemical spills or exposure.

ALL CATEGORY ENGINE EQUIPMENTS

Pneumatics Products

Fire & Safety

Automation & AVR Products

Filter Products

Governors Products

Air-Starter-Motor